Tag Archives: jack

Custom Frankenstein Telecaster

I got my hands on this Telecaster copy from the early 90’s. It was a gift from a fan who hoped, “It would got to a good home where someone might play it once in a while.”.

There was no doubt that this guitar had seen a few owners and that it had been a starter model once upon a time. With a fairly straight neck and no initial investment I decided that this guitar would become a personal project.

I began by removing all the hardware and electronics, sanding down through seven layers of hell, and shopping for higher quality replacement parts.

DSCF4884 DSCF4885

Finding the original sunburst on the back, I left some of the finish for cosmetic and sentimental purposes. I used deck stain (left over from a home renovation project), Hanging the body off a guitar stand with a coat hanger hooked through a hole for the neck bolts.

I used a block of wood and some wood filler to close-up the hole in the front face where the tremolo had been. Using the original pick-guard and jack/control plate as templates, I cut out aluminum from old ductwork to use as the replacements. Painting the pick-guard black and sanding it for color and texture was more challenging than I can describe. There are more than a dozen coats of paint, which ends up adding character as well as contrast compared to the jack/control plate that I left simple as sanded aluminum.



DSCF4892 DSCF4897

Here was my eBay shopping list:

  • Stock Stratocaster Boat-Jack
  • Two heavy chrome knobs
  • Gibson Les Paul style bridge-saddles & hard tailpiece
  • Grover mini-locking tuners
  • Wilkinson Vintage single coil bridge pickup
  • Oversized strap buttons & screws
  • Fender tweed guitar strap
  • Frankenstein pin
  • Frankenstein coin

While waiting on everything to come in the mail I stopped in at the local hardware store and picked up a five inch bolt since the guitar was originally a zero-nut style of headstock.


When the hardware arrived from eBay I was ready. I had already drawn up the schematics and wiring diagrams, so that was my first chore. I began by retrofitting the boat-jack onto the face of the guitar and sanding the heck out of the knobs. To make things even more challenging, I decided I wanted the boat-jack to be slightly recessed.

DSCF4947 DSCF4921

Once that was done, it was time to cut & place the pickups. I decided on One Volume / One Tone too keep it simple; the Wilkinson Vintage up front and a stock Ibanez INFS1 middle pickup (from a friend) in the bridge position. A three-way switch wired neck / both / bridge and the boat-jack complete the circuit.

DSCF4929 DSCF4934
DSCF4953 DSCF5004

Once the bridge and tailpiece were added it began to look like a guitar again. For adventures sake, I scalloped the last few frets and made the neck plate recessed.

DSCF5023 DSCF4928

With the Grover’s already installed, there were only a few cosmetic additions to the guitar and it’s case before it was complete.

HPIM1549 HPIM1554
DSCF5027 DSCF5029


Now dubbed Frankenstein, this guitar performs great considering. I keep it in open G tuning and use it a lot for slide work. Keeping the intonation set correctly is a constant battle. Generally I give it a good work out and simply compensate as best I can – much easier when playing slide.

The tones I get from Frank are pretty basic: weak & twangy or strong & dirty. What this guitar lacks in versatility it makes up for with character and clarity. Even through the thickest fuzz or distortion, the Wilkinson Vintage provides a crisp attack, which again works great for slide.

1 Comment

Posted by on May 3, 2011 in Chamberlain Gear


Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,